How to turn off mobile data on an iPhone. Options and description of Internet shutdown. Jamming the Wi-Fi connection

home

By periodically turning off 3G and mobile data, you will be able to noticeably and, accordingly, pay for using the network. This article provides instructions on how to disable 3g on iPhone 3g, as well as other data transfers.

Since this may seem a little confusing, let's start by explaining the difference between mobile data, 3G and data roaming.

What is data transfer

Mobile data is better thought of as mobile internet. If you turn them off, you will not be able to browse the web or use any application that relies on continuous Internet access. Some apps relating to email, contacts and calendar will have some functionality but cannot be fully used until you have an internet connection. Turning off mobile data does not mean that you cannot use the Internet on your mobile at all. As long as you have a Wi-Fi connection, you will be able to surf the web and email

as usual.

3G refers to the speed of your mobile Internet connection. If you have the option, you can disable 3g on your iPhone 3g and revert to the 2G standard, which is slower and runs over GPRS or EDGE.

Turning off your 3G data connection will help extend it while still allowing you to make and receive calls and access data using EDGE or GPRS.

Roaming Roaming means using mobile data in another country. The cost of using the Internet abroad is significantly higher. In this case, the question of how to disable 3g on iPhone 3g is especially relevant, since it is always better to find a cheaper point Wi-Fi access

to check email and browse the web. Moreover, problems with such points do not exist practically anywhere these days. In addition, you can get a free signal in cafes and train stations.

How to disable 3G on iPhone? This guide assumes that the phone is working, but these parameters are very similar on older versions of the platform. Depending on your operator mobile communications

From the Home screen, select Settings (if you can't see the app settings, go right to the Spotlight search screen and look for Settings).

Select "General" and then "NMobile" data. On some iPhones this item may be called Cellular. On older versions, look for “Networks” (this applies to instructions on how to disable 3g on iPhone 3g).

You can now use the slider next to "Enable 3G" to turn it off. However, if you are using a mobile operator that only supports 3G, you will not see this option at all, as disabling will not be possible.

You can also turn off Mobile Data in this menu, which means you must use Wi-Fi to access the Internet. In addition, you can immediately choose whether to allow data roaming.

Now go to the menu item that regulates mobile data transfer. You will be able to see a set of options showing what restrictions can be applied. Some apps automatically warn you that if your data connection is turned off, you won't be able to use them.

Conclusion

The above instructions show how to disable 3g on iPhone 3g, as well as other communication methods that may incur additional costs. As you can see, this is done very simply and does not require any special knowledge. By connecting only to Wi-Fi networks while roaming, you will see significant savings. Money. In addition, this will greatly extend the life of your smartphone's battery, which is also important, especially on the road.

Instructions

To get started, open the Settings menu, select General, then Network and enter your operator information in the Cellular Data Network section. Beeline subscribers should enter the value internet.beeline.ru in the APN field, and enter the word beeline in the Login and Pass fields. MTS subscribers only need to fill in the APN field by entering internet.mts.ru into it. Well, if you use MegaFon services, enter internet in the APN field, and enter gdata in the Login and Pass fields.

As an alternative browser, you can use the popular Opera mini, which is available in the AppStore, the icon of which is located on the main screen by default. Opera mini is a bit like Safari, but does not support Multitouch technology. To enlarge the page, tap the screen twice with your finger. Repeated action will return the page to its original form.

Helpful advice

If you're within range of a wireless network, when you try to connect to the Internet, iPhone will notify you of an available Wi-Fi network and prompt you to connect. Agree! This way you will save money on your mobile account.

Tip 2: How to set up Megafon Internet on a Chinese iPhone

Settings internet connections V " MegaFone» is no different from the setup of any other major telecom operator. You just need to order automatic settings using the specified number (or numbers) and save them. It will not matter what brand of phone you use.

Instructions

Anyone from MegaFon can dial the subscriber service number 0500 at any time to receive settings on their phone. It is worth noting that this number is intended exclusively for. To order automatic settings by landline phone, use the number 502-55-00. After you call one of the numbers and wait for an answer, tell the operator the required information. Once this procedure is completed, you will receive a message on your phone containing required settings.

In addition, the company provides GPRS settings to all users. They can be received using the short number 5049. To do this, you need to send an SMS message to it, and in its text indicate the number 1. The specified number also allows you to receive WAP and MMS settings. To order them, in the message you send, replace the one with a three or a two.

Please note - if he is on the MTS network, he will also be able to do so on his phone. To do this, he will need to call the short number 0876. By the way, it is completely, no money will be charged for the call. To get an online profile, you can also visit the operator’s official website. There is a special form that you must fill out and submit.

The Beeline company provides a USSD request number *110*181#. With it you can set up a GPRS connection. And thanks to the command *110*111#, automatic Internet settings are available.

Sources:

• set up internet on chinese iphone

IPhone 4S allows users to access the Internet using wireless data transfer technologies. You can use both Wi-Fi and 3G to realize the ability to browse the Internet.

To access via Wi-Fi, you can use the corresponding settings menu item. In this case, you will not have to perform any additional configuration manipulations. To connect, go to “Settings” - Wi-Fi. Move the slider to the right to enable data transfer. From the list provided at the bottom of the screen, select the name of the access point you want to use for connection. If necessary, enter the required . After selecting, in a few seconds the connection will be made and you will be able to use the Internet.

To connect to the network using wireless data transfer technology through the operator's 3G access point, you will need to enter additional settings. If you are using iOS 6 version, to configure the settings, go to “Settings” - “General” - “Cellular Data” - “Cellular Data Network”.

For iPhone 4s with iOS 7, the 3G menu is located in “Settings” - “ cellular" - "Cellular data network."

In the appropriate lines of the proposed options, enter the required parameters. In the APN line, enter the address of the access point, as well as enter the username and password to make the connection (if required). You can find the appropriate settings on the official website of your operator. You can also contact mobile support to clarify the required parameters. For Beeline, you need to specify home.beeline.ru or internet.beeline.ru as the APN. In the “Username” and “Password” fields, enter beeline. To use Megafon, just write the internet value in the APN field. To access via MTS, enter internet.mts.ru as APN. The username and password for the operator must be specified as mts.

You can also contact your mobile operator's support team to resolve the issue.

After making the settings, go to the previous menu and switch the “Cellular Data” slider to the on position. If the settings were made correctly, the EDGE or 3G icon will appear on the top panel. To access, use a browser, which can be accessed through the corresponding icon on the screen. If you cannot connect to the network, reboot and check the information provided again.

Most users in their home region have unlimitedANDInternet, so if the iPhone updated the application without your knowledge or even downloaded a new version operating system, it won't hurt your wallet.

The situation gets worse abroad, where every random megabyte can cost hundreds of rubles. We tell you which settings will be useful to check and which functions to disable before going abroad.

1. Disable roaming

If you do not buy a SIM card in the country you are traveling to, turn offcellular data and data roaming. Having cellular data enabled on a Russian SIM card will inevitably lead to traffic leakage.

2. Disable automatic downloads

iPhone uses cellular data to update apps, music, games and programs connected to one Apple ID. You can disable these features while you are roaming.

3. Set up photo compression

If you use iMessage to send travel photos to loved ones, you can set image compression. In this case, less traffic will be needed to send them.

4. Disable "Modem mode"

5. Disable content updates

iPhone in the background updates content for weather, maps and other applications so that the most up-to-date information is always displayed on the screen. If you are traveling abroad, you can disable this feature.

6. Look into your cellular data settings

When going on a trip, check what applicationsIeat up a lot of mobile traffic, in cellular data settings. So that they do not cause unexpected bills from mobile operators, turn them off when you leave.

7. Disable data downloadsApple Music

If you use Apple Music, disable data downloads via Cellular Data for this service. If the tracks are not downloaded to your phone for offline listening, the service will use mobile traffic to download music and album covers.

8. Disable"Wi-Fi Help"

iPhone has a feature "Wi-Fi Help". When the Wi-Fi connection is weak, cellular data comes to the rescue and helps download information. To prevent this from happening while roaming, disable this feature.

9. Turn off account updates

Default iPhone updates your mailboxes and contacts in the background and consumes mobile traffic for this. To prevent him from doing this abroad, disable the function.

These 9 simple steps will get your iPhone ready for travel and help you avoid confusion at the end of the month when cell phone providers issue your bill.

Setting up the Internet on iPhone (4, 5, 6, 7, 8, X, SE) is a delicate and delicate process. Like any other more or less modern smartphone, the iPhone can connect to Wi-Fi, 3G, 4G, and in the near future, 5G. This seems obvious, but what could be so difficult about setting up the Internet?

However, many Apple users who have been using this company's smartphones relatively recently periodically encounter problems with incorrect settings, which is why they cannot use this function. In this article, we will tell you how to properly set up the Internet on your iPhone to get the most out of it.

Let's start with setting up mobile Internet on an iPhone, since it is the most common and in demand.

1. First, go to “Settings” → “General” section → “Network” tab.

2.In the “Cellular Communications” section, scroll down, find the “Cellular Data Communications” subsection and go into it.

3. Pay attention to the “Cellular Data” block. 3 fields must be filled in here: APN, username, password.

For operators mobile internet, you must enter the following data:

Internet and MMS settings for iPhone

Internet and MMS settings on iPhone and iPad

Kyivstar mms, internet settings for iPhone 5

Reset APN settings if problems occur

If all the data is entered correctly, but there is no Internet, the best solution would be to reset the APN settings for their subsequent automatic or manual entry. To return to APN settings by default, do the following:

1. Open Settings.

2. Select the “Cellular” section.

4. Select the "Reset settings" function. If you have installed a configuration profile, the profile's default settings will be used instead.

Setting up (turning on and off) Wi-Fi on iPhone X, 8, 7, 6, 5

Next on our list is connecting and setting up a Wi-Fi network. Connecting to the network is extremely simple and the only data you will need to enter is the set password (if the network is not open or public).

Here's what you need to connect to Wi-Fi:

1. Tap the Settings icon on the home screen and then tap Wi-Fi.

2. Make sure the Wi-Fi slider is set to the active position, then select the network to connect to. If you have previously connected to a specific network, when you are within range of an access point, your smartphone will automatically connect to the network.

3. Once you select a network, a message will appear asking for a password .

4. Enter your network password.

5. Click the "Join" button.

6. Free, public Wi-Fi networks generally do not require passwords. However, before connecting to such networks, you should take care of security in order to avoid unpleasant situations with data loss and interception.

If you cannot click "Join", it means that the password you entered is incorrect. Please try again or contact your network administrator for further assistance.

Once you have successfully joined the network, a checkmark will appear next to the network name and a Wi-Fi signal strength indicator will appear on the top left side of the screen.

It is difficult to imagine such a high-tech device as the iPhone without the Internet. However, many users, in order to save traffic, simply disable the ability to access the Internet via their phone. There are several ways to disable the Internet on this device.

Let's look at how to turn off the Internet on iPhone

As a rule, the desire to turn off the Internet appears after discovering that various applications periodically access the network using Push notifications. You don't use the Internet intentionally, and the iPhone itself wastes your data. If this is exactly the problem, then you can turn off Push notifications, thereby prohibiting installed programs go online without your notice. To do this, click on “Settings”, go to “Notifications” and set the switch to position “0”. Consequently, you will be able to completely prevent any programs from accessing the Internet without your knowledge.

If disabling Push notifications is not enough for you, you can completely restrict your phone’s access to the Internet. To do this, open “Settings”. First, select the “Basic” section, then “Network” and set the “Cellular data” and “Enable 3G” switches to the “0” position. After this, the iPhone will definitely not be able to access the Internet via 3G and GPRS channels.

If you want to limit your iPhone’s connection to the Internet only via a wireless network, then open “Settings”, go to the Wi-Fi section and set the switch for the Wi-Fi option to position “0”. So to the question? How to turn off the Internet on an iPhone 4s, or on an iPhone of a different series, there are very simple answers.