home
Anti-swarm measures in the apiary are required to strengthen the bee colony. Depending on climatic conditions, the process occurs at different times and affects the activities of the family, so it is important to know about anti-swarm techniques. In addition, the apiary is subject to attacks by pests and you need to be able to deal with them.Fighting tits in the apiary
Tits attack bees in autumn and winter in search of food. Cunning birds sit on a plank at the entrance and knock until the insects appear. This is how they destroy the bees.
You should not make a hive from polystyrene foam. Birds use their beaks to make holes and enter the house.
Attach inclined plywood boards to the entrance so that only bees can move, or install a metal mesh.
Wax moth control Wax moths are a type of small butterfly that harm bees. The attitude of beekeepers towards such insects is ambiguous. Some breed it, others fight it. When wax moths eat bee products, they absorb beneficial substances and are therefore considered medicinal.
An alcohol tincture is prepared based on the larvae. However, to make such a medicine, an entire hive must be eaten. Not every beekeeper will take such a step.
The moth, shashel, and bloodworm eat literally all beekeeping products, honeycombs and cocoons. The moth does not affect the bees, but if the family is weak, it dies of hunger.
The problem is that bees fly during the daytime for nectar and practice. Moth caterpillars come out to hunt only at night. The task of an adult is to find a male, mate and lay eggs, which he diligently hides in the crevices of the hive.
The use of insecticides is excluded; bees may die.
Some beekeepers use formalin, which is strictly prohibited, because honey is a food product.
Watch the video on how to deal with wax moths
Bees are often subject to visits from uninvited guests. - double trouble, the honey will eat and stir up the nests, so beekeepers have invented a lot of ways to combat pests.
Mice are dangerous in winter. There are simple ways to get rid of rodents:
Mice enter the hive through cracks. In addition, they can chew through the house. Therefore, it is important to cover all kinds of cracks. Also fence with metal mesh. The bottom and roof must be covered with iron sheets, and gratings must be placed on the entrances.
Mousetraps and traps are homemade products, but can be purchased at the store. Catching items are placed next to the hives.
Quick-acting poisons are not a humane method, but bees are more expensive than rodents. The following chemicals are used:
Mice also do not like the smell of plants:
Each beekeeper determines for himself what is more profitable to use to combat rodents.
Not only are ants undesirable neighbors for bees, but also... During cold weather, insects look for a warm place and nest between the walls of the hive. Here they breed and feed on bee reserves. Therefore, you should get rid of the anthill near the apiary in the summer.
The chemicals available are supersulfate, DDT and hexachlorane. Ant paths are treated with preparations. The method not only removes, but also kills insects.
Less expensive traditional methods, including:
You can make a moat and pour sweet water into it. The bees will drink, and the ants will not be able to crawl to the hive.
Bee swarming is a natural process that allows you to increase your apiary in the spring. But anti-swarming methods are more often used; it is easier to prevent than to lose bees. This process causes the insects to leave the hive. Such an exit often occurs without a beekeeper. The swarm is grafted onto trees and bushes. One such cluster contains up to 50,000 bees and carries up to 3 kg of honey with it.
How to prevent swarming:
Some beekeepers believe that it is necessary to get rid of queen cells. However, this method does not solve the problem that prolongs swarming, the bees build new honeycombs.
There are various anti-swarming methods that direct insects to collect honey. The best are those that have been tested by beekeepers in practice.
The method is only suitable for double-hulled hives.
The queen and brood are left in one house, and the frames are removed in the other. The housings are separated using a grid. After a while, they put up frames with wax and honeycomb.
Many beekeepers use the Dymari method.
The mother is left on the honeycomb, the young bees are moved to another hive. Printed brood is removed, but open brood with the queen bee is not.
This method has 3 options:
Fumigate a nest with bees so that they collect honey in their crops. Separate the swarm, place a gangway nearby, the insects with the queen form a ball, you need to collect it into a swarm. A day later, plant the swarm in the hive.
Watch a video about Taranov’s anti-swarm method
When bees are actively working, they forget about swarming. Separate the nest with an empty extension. Insects do not like empty spaces, so they begin to actively fill them.
Making a scion is very simple. Knock down the box and paint it green. Then place the honeycomb. Rub the outside of the box with propolis and wax. Hang on a tree. When all the bees occupy the box, move it to a new hive. Scions are placed early in spring or summer.
The greatest threat to the normal existence and development of insects and their families during the period of intensive honey collection comes from various types of pests.
The main danger comes from:
Among the dangerous birds are tits, sparrows, bee-eaters, bee-eaters, and shrikes.
It will only take time to get rid of uninvited guests who steal honey, attack bees, destroy brood and can infect with pathogens.
Protecting bees from ants does not require much labor or expense
It is advisable to use:
Protecting insects from mice comes down to the use of traps, mousetraps, and traps. It is necessary to eliminate all cracks and holes in the hives. Protection against these and other rodents should be especially reliable in winter. Otherwise, once they get into the hive, they can do a lot of harm. In winter, they eat bees and honey, and once they get into a honeycomb storage facility, they destroy part of the honeycombs. To exterminate mice, it is advisable to attract domestic cats.
Protecting insects from wasps and hornets is also of great importance for the preservation of the apiary. The danger of wasps is that they attack bees, enter their homes and steal bee food supplies.
It is better to destroy female wasps in the spring, using homemade traps from bottles with honey solution. This is a kind of protection against annoying pests. It is better to destroy wasp nests by spraying them with chlorophos or filling them with carbon disulfide.
Protection of bees from tits is required in late autumn and winter. By knocking their beaks on the wall of the hive, they guard and eat crawling bees. Tits should not be destroyed, but protection from them is also necessary. To save bees, you should scare away these annoying birds. You can make a canopy over the entrance from metal or nylon mesh.
Categories26.03.2018
Sometimes a beekeeper is faced with a task that at first glance is simple, but if it is not solved in time, then you can lose a lot of bees. One such problem that arises in the fall is chickadees. We offer you two articles that talk about exactly this. .
Tits cause great harm to wintering colonies. To protect the bees from these robbers, I take a board with a length equal to the size of the front wall of the hive and a width of 8 - 10 cm. I attach it to the entrance so that the upper side of the board is 2 - 3 cm above the entrance, and the bottom is on the entrance board. Through the gap formed between the board and the wall of the hive, air will freely pass into the hive, and a cautious tit will not dare to climb into the narrow passage. I do this, and the tits don’t even fly up to the hive.
P. F. BODACK.
My apiary constantly winters in its summer camp sites - in the garden. As soon as the ground is covered with snow, tits immediately begin to raid bee colonies.
It’s painful to look at when you see under the trees in the garden in the apiary not white, but gray snow from the remaining bee wings and legs after the tit’s meal. For several years in a row I have been successfully fighting these birds using a special device.
From ordinary construction shingles (for plaster), the width of which is 25 and the thickness is 5 mm, I use small nails to knock down a square with a side of 143 mm (the length of the sides can be increased). After this, on two opposite sides (Fig.) I use a knife to make ten slits (1) up to 3 mm deep on each side at a distance of 13 mm from one another. On the other two opposite sides I make one slot in the middle of the same depth. Then I take an ordinary fishing line with a cross-section of 0.2 or 0.3 mm, at the end of which I tie a knot. I lay it between the adjacent sides of the square, pinch it and bring the free end of the line out to the end side at point A, insert it into slot B and then pull it to the opposite side into slot D, return, work with slots D and E, and so on until the end (2 ). Thus, ten rows of fishing line are obtained at a distance of 13 mm from one another. This size can be increased slightly, but so that the tit’s head does not fit between adjacent rows of fishing line. Next, I stretch the fishing line through the slot O of the top bar into the slot K of the bottom, where I secure its end. In this case, I make sure to wrap the line once around each horizontal line in the places where they intersect (4). This way, all ten stretched fishing lines will be fixed without violating the established distance of 13 mm between them.
Since the fall, I have been hanging the finished devices on two nails on the upper entrance with the side where there are no slots.
Intertwining is not a hindrance for bees; they can always fly around when it warms up. But the tit does not have the opportunity to knock at the entrance and lure out the bees, since its head does not fit through the binding.
When inspecting the device in the spring, I remove it and store it until next fall. Previously, I made weaving from wire, but it rusts and fails, but the fishing line does not deteriorate in any weather.
3.I.OIL.
Beekeeping Magazine.
Hi all!
It is impossible to even imagine our surrounding world, our nature, without such a cute and cheerful tit bird. But many beekeepers have the opinion that tits pose a significant threat to the apiary. I even know one who periodically shoots them in his apiary and in the area.
So, I leafed through several books at my leisure and in each of them, in the chapter “Enemies,” there is a section “Birds”. And the tit is clearly distinguished separately and proudly against the background of all other birds that are enemies of bees: bee-eaters, shrikes, etc.
Today I want to figure out this: can a tit really be so dangerous for bees, what is this danger and how to deal with it? And most importantly: is the tit really the enemy of bees?
It is worth admitting that I read earlier that tits partially satisfy their nutritional needs at the expense of bees and easily find food for themselves in winter. That these fidgety tits sit on the landing boards and begin to knock on the hive with their beaks until the “sleepy” bee leaves the entrance. Here the bird presses the bee with one paw, takes out the entrails with its beak, sucking out the treasured nectar and eats the poor bee whole, often leaving only chitin. But I didn’t think that I would feel significant damage from these white-cheeked beauties, and I hadn’t particularly noticed them in the area before.
The problem, in my opinion, is specific to i. And it doesn’t mean that the titmouse will eat several bees a day. The main problem is different.
Firstly: the tit, with its knocking, disturbs the peace of the wintering bee colony, the club may begin to loosen, and the bees will worry. A crowded intestine and bustle are not the most suitable company. Diarrhea is possible and, as a result,... Plus, bees will not use honey from worn-out frames for food in the future.
Secondly: my loved ones cannot withstand the pressure of these hooligans at all.
Studies